|
|
| |
| Highh frequency curved plywood press |
| Press Machine |
|
|
Product Introduction:
1. Brief introduction of High frequency
Highh frequency dielectric heating is a kind of heating source that turns normal electric power to high frequency electromagnetic power. Under this HF power, water molecules with in the glue will move intensively, the friction between those molecules will cause heat instantly, thus the heat make water vaporized and glue bonded. Different from steam or electric heating which make the mould hot and transfers the heat slowly and gradually to the core of the plywood, high frequency heating will penetrate the wood and heat on the glue line/water exactly, thus make it quite fast, while the wood is dried and consume no power, much power saved.
2. Characteristics of JIYUAN company
The machine can be used to bend all kinds of plywood products, such as office chair, safa, bed slats, musical instrument as well as other plywood elements. There are following characteristics.
1) High frequency dielectric heating faster and more uniform
2) High frequency dielectric heating only heats the glue save the power.
3) Wooden mold will save the customers cost and will less heat lose
4) After bending, the shape is stable and will not change.
5) Two sets of press shift to work, save the working time and improve the efficiency.
3. Specification
Model
GJQ-20-PI-60-JY
GJQ-20-PI-80-JY
GJQ-30-PI-100-JY
GJQ-40-PI-120-JY
GJQ-50-PI-150-JY
Main voltage
3 phase 380V, 50Hz or customized
Output power 20----50KW or customzied
Working table size
1200x600mm
1500x800mm
1600x1000mm
2500x1200mm
3100x1000mm
All the working table size can be customized
Pressure
60 T
80T
100T
120T
150T
Output type
Two sets of press share one HF generator (shift to work)
Protection
Filament two grade warm up, over current protection, air pressure protection, over temperature protection, door switch protection |
|
|
| |
|
|
|
