|
|
Solid wood bending machine |
Press Machine |
|
Product Introduction:
The component of the Solid wood bending machine: Hot press, steam soften vessel, working table, controlling switch. The overall size of the press is High 3000mm*width1000mm*longth 1200mm Total weight: about 5T Working process of the system: 1 Soften the wood material in the steam soften vessel 2 Put them on the working table, 3 Move it from working table to the hot press, 4 The hot press bend the wood and dry it. The pressure of hot press off, take the bent material out. The machine got patent. Mode of the machine RYS-I-40JY The material of the Steam vessel and its tube. Stainless The capacitance of the steam soften vessel. ?400z*1500mm The air pressure within the steam vessel 0.4-0.6Mpa The steam pressure needed 0.1Mpa Steam pressure required 0.7MPa Consumption of steam 200kg/hour Soften time About 60min(2cm thickness, the time may differ with different wood and thickness) Power of the steam soften vessel 2.5kW Layer of the press 4 Forming and drying time of bend wood About 60min (the time may differ with different wood and thickness) The productivity of the press About 40-50pcs/1.5hour(100mm width wood ppiece)
|
|
|
|
|
|
|